Features:
- Delivers up to 530 HP with 506 FT-LBS of torque (APR Plus)
- Delivers up to 530-627 HP with 506-533 FT-LBS of torque (APR Stage 1)
- Max gains of a +88 WHP and +115 WFT-LBS of torque (APR Plus)
- Max gains of +88-176 WHP with +115-144 WFT-LBS of torque (APR Stage 1)
- Supports 91 AKI, 93 AKI, 100 AKI, 104 AKI, and E60-E85 fuel grades
- Ethanol and race fuel support for maximum power on the race track
- Optional factory term limit matching limited powertrain warranty with APR Plus
- Multiple stages of performance offered
- Launch control optimized for improved launches
- Wet-mode retains factory output levels for maximum safety, stability, and grip
- Standing RPM soft limiter increased in neutral
- Optimized thermal management with various engine safety protection routines added
- Enhanced power delivery and drivability through recalibrated exhaust flap actuation
- No hardware required (Software only)
- Supports standard bolt on modifications
- Free lifetime updates
- Direct OBDII port flash (No ECU removal)
- 30 day money back guarantee
Brand | APR |
---|---|
Emission Code | 7 |
Engine Aspiration | Turbocharged |
Engine Configuration | H6 |
Engine Displacement | 3.0L |
Engine Family | Porsche 9A2 |
Engine Orientation | Longitudinal |
Fuel Type | Gasoline |
Market | NAR |
ROW | |
Product Type | ECU Upgrade |
Part Number | ECU-30T-S-992 |
This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status.
Does this fit your vehicle?
- PORSCHE (9)
- 911 (9)
- CARRERA 4S (3)
- CARRERA S (3)
- TARGA 4S (2)
- TARGA 4S HERITAGE DESIGN EDITION (1)
- 3.0L H6 (9)
DRIVING MODES, FEATURES, AND SAFETY
Driving Modes - We’ve optimized boost, fueling, ignition, cams, and more to achieve greater power and torque in Normal, Sport, and Sport+ modes, while Wet-mode retains factory output levels for maximum safety, stability, and grip.
Features - In Sport Plus mode we’ve reduced turbo lag during reapplication of the throttle by building boost while off the throttle. We’ve raised the free-rev limit in neutral. We’ve optimized launch control, improving launches. The exhaust flap was recalibrated to reduce back-pressure and create turbo spool characteristics. Many other features, such as break boosting, left-foot braking, speed limiters, and more that are common modifications on other platforms are already present from the factory on this ECU.
Safety - With many customers tracking their Porsche, safety is paramount in our calibration strategy. Through the use of extreme datalogging equipment and additional sensors, thermocouples, and transducers, our engineers were able to fully optimize the ECU for advanced safety routines. This includes implementing several routines not enabled from the factory. The entire thermal management system is optimized to reduce engine bay temperature, and reduce intake air temperature, while also implementing advanced protection routines to prevent oil temperature from achieving unsafe levels. The exhaust crackles disable when temperature thresholds are crossed, and are only enabled in sport mode. Next, we help protect the engine from LSPI by preventing the engine from being lugged out in tall gears. We also protect the turbo from damaging compressor surge, and add in turboshaft overspeed protection. We’ve enabled new temperature protection routines to prevent the engine, exhaust, and other components from overheating, and have implemented temperature management strategies that are fully mindful of the platform’s limited fueling capabilities. We’ve calibrated torque delivery to be mindful of the transmission. We’ve optimized the injection strategy to not only deliver a fatter torque curve and better spool, but to reduce the chances of knock, and torque dips. This is also achieved alongside per cylinder ignition advance and fuel trimming. Serious track enthusiasts should consider running race fuel, and adding additional coolant and charge air cooling upgrades for maximum performance.
APR ECU UPGRADE STAGES
APR’s ECU Upgrades support various octanes both with or without any hardware modifications. Each stage is fully compatible with an upgraded intake, intercooler, exhaust, or other minor bolt on modifications. Unlike many platforms, no additional software tweaks are required to properly utilize a high flow race exhaust system as the factory system poses minimal restriction.
- APR STAGE 1
- APR PLUS
The APR Stage 1 ECU Upgrade is the first step towards making more power! This simple upgrade requires no engine hardware modifications, and produces 530-627 HP with 506-533 FT-LBS of torque, depending on octane. Gains as high as +88-176 WHP with +115-144 WFT-LBS of torque are available throughout the power band. To get more power, the vehicle can be outfitted with an upgraded intake, cooling, or exhaust system.
APR Stage 1 is available for 91 AKI, 93 AKI, 100 AKI, 104 AKI, and E60-E85 fuel grades in North America, and 95 RON, 98 RON, 104 RON, 108 RON, and E60-E85 in the Rest of the World.
Please note, our E85 software is not a full flex fuel program. In this mode the engine is only designed to work on E85, as found directly at the pump, including both summer and winter blends from E60-E85. Using traditional pump fuels in this mode may result in engine damage. Do not manually blend with traditional pump fuel or race fuels or use race specific barrels of E85. To ensure proper E85 content levels, APR recommends using an E85 content sensor.
Porsche Rear Engine Dyno Testing Notes - This engine is extremely sensitive to intake air temperature (IAT) due to the rear engine and rear cooling design. Power figures on a stationary dyno will vary wildly with limited airflow compared to real world conditions. As IAT increases the calibration will intentionally reduce power to protect the engine.
APR CALIBRATION REPORT
STAGE | HP | TQ | MAX GAIN | MAX GAIN |
---|---|---|---|---|
Stock As Reported by Porsche | 443 HP | 390 FT-LBS | ||
Stock As Measured by APR | 450 HP | 400 FT-LBS | ||
APR PLUS | ||||
91 AKI | 530 HP | 506 FT-LBS | +88 HP | +115 FT-LBS |
STAGE 1 | ||||
91 AKI / 95 RON | 530 HP | 506 FT-LBS | +88 HP | +115 FT-LBS |
93 AKI / 98 RON | 540 HP | 511 FT-LBS | +93 HP | +117 FT-LBS |
100 AKI / 104 RON | 576 HP | 517 FT-LBS | +129 HP | +129 FT-LBS |
104 AKI / 108 RON | 593 HP | 525 FT-LBS | +146 HP | +133 FT-LBS |
E60-E85 | 627 HP | 533 FT-LBS | +176 HP | +144 FT-LBS |
Only use fuel equal to or higher than specified. Never use a lower octane fuel. Always follow our fuel guide, especially with race fuel and Ethanol, where available. Dynos are for reference only. Results will vary. Contributing factors include the vehicle condition, vehicle setup, dyno type, dyno setup, environmental factors, fuel quality, and more. When describing fuels, the North American Region (NAR) uses the Anti-Knock Index (AKI), (RON+MON)/2, or (R+M)/2. The Rest of the World (ROW) uses RON. RON is Research Octane Number and MON is Motor Octane Number.
PURCHASING, GUARANTEE, AND UPDATES
How to Purchase - APR Software Upgrades are only available through Authorized APR Dealers. The dealer will connect to your vehicle, and install the update.¹
Money-Back Guarantee - Try our Software Upgrades for up to 30 days, risk free! If you are not satisfied, return to an APR Dealer to have it removed and refunded.²
Free Updates - If we make an update, add a standard feature, or if the manufacturer issues an update, you are entitled to a free update.³