Features:
- Delivers up to 411 HP with 551 FT-LBS (APR Plus)
- Delivers up to 411-491 HP with 551-629 FT-LBS depending on octane (APR Stage 1)
- Max gains of +103 AWHP and +190 AWFT-LBS (APR Plus)
- Max gains of +103-171 AWHP and +190-249 AWFT-LBS depending on octane
- Supports 91 AKI, 93 AKI, 100 AKI, 104 AKI, and E60-E85 fuel grades (APR Stage 1)
- Optional factory term limit matching limited powertrain warranty with APR Plus
- Standing RPM soft limiter increased
- Left-foot braking / brake boosting added
- Properly rescaled performance gauges
- Optimized launch control strategy for faster response and boost building
- Optimized driveline protection during launch
- Optimized thermal management and additional protection
- Optimized exhaust crackle temperature safeties
- Optimized high-gear LSPI protection and turbocharger protection added
- Optimized the factory volumetric efficiency low end torque fluctuation
- Speed limiter removed
- Increased rev limiter for use with TCU upgrades
- Exhaust flaps recalibrated to provide better performance and increase sound during free-rev
- Auto start-stop defaults to the off position
- No hardware required (Software only)
- Supports standard bolt on modifications to further increase outpu
- Eliminated the need for a TCU upgrade to achieve full torque
- Free lifetime updates
- Direct OBDII port flash (No ECU removal)
- 30 day money back guarantee
Brand | APR |
---|---|
Engine Aspiration | Turbocharged |
Engine Configuration | V6 |
Engine Displacement | 3.0L |
Engine Family | EA839 |
Engine Orientation | Longitudinal |
Fuel Type | Gasoline |
Market | NAR |
ROW | |
Product Type | ECU Upgrade |
Part Number | ECU-30T-EA839-B9 |
APR ECU UPGRADE STAGES
Our new suite of MG1 ECU software comes after months of extensive research and development that is typically absent from the aftermarket. Our upgrade makes the engine more powerful and more exciting. We’ve extensively calibrated the system to work flawlessly on the track, while retaining safety routines to protect your engine in the most demanding scenarios. This was all made possible by our engineering team's pursuit of perfection. Development vehicles were outfitted with additional sensors, including turbo shaft speed sensors, thermocouples, transducers, and more, along with our high speed direct RAM logging equipment, to feed valuable data to the team for analysis. After thousands of hours of testing and tuning we created new calibrations that are fine tuned for several octanes and contain hundreds of map changes, with a vast array of safety features built in.
The result of this work is nothing short of astounding. Not only have we increase power, we’ve added many safety routines to ensure the engine and components are protected under demanding scenarios. Additionally we’ve added features to enhance the driving experience.
We’ve recalibrated the exhaust flaps to reduce backpressure and create consistent turbo spool characteristics. Sound characteristics are improved too, especially during free-rev, which sees its limiter raise in park and neutral. We’ve retained factory exhaust crackle, which mimics much of the behavior of the RS models without being over-the-top and obnoxious. This enables during free-rev, downshifts, and lifting off the throttle. It’s optimized with exhaust flap actuation, and includes safety routines to ensure component protection. Through proper torque management and ECU code changes, we’ve removed the requirement of a transmission tune to achieve full torque. We’ve optimized launch control for a better take-off and enabled boost building on the line. Additionally we’ve defaulted the start-stop feature to the off position, removed the speed limiter, added left-foot braking or brake-boosting, and configured the ECU to send the correct calibration to the dash for the performance gauges.
To protect the engine and components we’ve spent a considerable amount of time tuning safety routines, some of which were not active from the factory. The ECU will protect the engine should the exhaust flaps fail as back pressure becomes too high. The optional exhaust crackle feature will turn off should components get too hot. The engine has advanced LSPI protection to prevent the engine from damage when being lugged in the tallest gears. Excessive intake air temperature, which is common on a dynamometer, will cause power to reduce to protect the engine. Furthermore more we’ve added and calibrated protection routines for turbocharger pressure ratios, shaft speed, exhaust pressure, intake air temperature, coolant temperature, oil temperature, lambda, fueling system limitations, and more. All of this and more gives us confidence to offer an optional limited powertrain warranty through APR Plus!
APR CALIBRATION REPORT
STAGE | HP | TQ | MAX GAIN | MAX GAIN |
---|---|---|---|---|
Stock As Reported by Audi | 349 HP | 369 FT-LBS | ||
Stock As Measured by APR | 369 HP | 394 FT-LBS | ||
APR PLUS | ||||
91 AKI / 95 RON | 411 HP | 551 FT-LBS | +103 HP | +190 FT-LBS |
STAGE 1 | ||||
91 AKI / 95 RON | 411 HP | 551 FT-LBS | +103 HP | +190 FT-LBS |
93 AKI / 98 RON | 428 HP | 567 FT-LBS | +119 HP | +205 FT-LBS |
100 AKI / 104 RON | 438 HP | 573 FT-LBS | +127 HP | +209 FT-LBS |
104 AKI / 108 RON | 450 HP | 596 FT-LBS | +144 HP | +225 FT-LBS |
E60-E85 | 491 HP | 629 FT-LBS | +171 HP | +249 FT-LBS |
Only use fuel equal to or higher than specified. Never use a lower octane fuel. Always follow our fuel guide, especially with race fuel and Ethanol, where available. Dynos are for reference only. Results will vary. Contributing factors include the vehicle condition, vehicle setup, dyno type, dyno setup, environmental factors, fuel quality, and more. When describing fuels, the North American Region (NAR) uses the Anti-Knock Index (AKI), (RON+MON)/2, or (R+M)/2. The Rest of the World (ROW) uses RON. RON is Research Octane Number and MON is Motor Octane Number.
PURCHASING, GUARANTEE, AND UPDATES
How to Purchase - APR Software Upgrades are available through Authorized APR dealers. The dealer will connect to your vehicle, and install the update.
Money-Back Guarantee - Try our Software Upgrades for up to 30 days, risk free! If you are not satisfied, return to an APR Dealer to have it removed and refunded.²
Free Updates - If we make an update, add a standard feature, or if the manufacturer issues an update, you are entitled to a free update.³