APR ECU UPGRADE - 3.0T GTS (992)

APR

$1,499.95 - $2,999.95
(No reviews yet) Write a Review
SKU:
ECU-30T-GTS-992
OVERVIEW
We're excited to announce our Engine Control Unit (ECU) Upgrades are now available for the Porsche 911 Carrera/Targa (992) 3.0T engine with the Bosch MG1 ECU! Expect massive gains with up to 530-627 HP with 506-533 FT-LBS of torque on tap, depending on octane and stage! Our new suite of software comes after months of extensive research and development that is typically absent from the aftermarket. Our upgrade makes the engine more powerful and more exciting. We've extensively calibrated the system to work flawlessly on the track, while retaining safety routines to protect your engine in the most demanding scenarios. This was all made possible by our engineering team's pursuit of perfection. Development vehicles were outfitted with additional sensors, including turbo shaft speed sensors, thermocouples, transducers, and more, along with our high speed direct RAM logging equipment, to feed valuable data to the team for analysis. After thousands of hours of testing and tuning we created new calibrations that are fine tuned for several octanes and contain hundreds of map changes, with a vast array of safety features built in.

Features:

  • Delivers up to 530 HP with 506 FT-LBS of torque (APR Plus)
  • Delivers up to 530-627 HP with 506-533 FT-LBS of torque (APR Stage 1)
  • Max gains of a +67 WHP and +89 WFT-LBS of torque (APR Plus)
  • Max gains of +67-147 WHP with +89-119 WFT-LBS of torque (APR Stage 1)
  • Supports 91 AKI, 93 AKI, 100 AKI, 104 AKI, and E60-E85 fuel grades
  • Ethanol and race fuel support for maximum power on the race track
  • Optional factory term limit matching limited powertrain warranty with APR Plus
  • Multiple stages of performance offered
  • Launch control optimized for improved launches
  • Wet-mode retains factory output levels for maximum safety, stability, and grip
  • Standing RPM soft limiter increased in neutral
  • Optimized thermal management with various engine safety protection routines added
  • Enhanced power delivery and drivability through recalibrated exhaust flap actuation
  • No hardware required (Software only)
  • Supports standard bolt on modifications
  • Free lifetime updates
  • Direct OBDII port flash (No ECU removal)
  • 30 day money back guarantee
SPECS
Brand APR
Emission Code 7
Engine Aspiration Turbocharged
Engine Configuration H6
Engine Displacement 3.0L
Engine Family Porsche 9A2
Engine Orientation Longitudinal
Fuel Type Gasoline
Market NAR
  ROW
Product Type ECU Upgrade
Part Number ECU-30T-GTS-992
EMISSIONS
7

This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status.
TECH RESOURCES
 
Important fuel quality information
Important fuel quality information
 
Find your boxcode and revision
Find your boxcode and revision
 
APR Plus Warranty Booklet
APR Plus Warranty Booklet
 
NOTICE: After installing software, the following steps MUST be followed to allow all modules to shut down properly for proper operation: 1) Cycle the key twice. 2) Lock the car. 3) Let the car sit for 15 minutes. 4) Turn on the vehicle and enjoy. Only use fuel equal to or higher than specified. Never use a lower octane fuel. Always follow our fuel guide, especially with race fuel and Ethanol, where available. Dynos are for reference only. Results will vary. Contributing factors include the vehicle condition, vehicle setup, dyno type, dyno setup, environmental factors, fuel quality, and more. When describing fuels, the North American Region (NAR) uses the Anti-Knock Index (AKI), (RON+MON)/2, or (R+M)/2. The Rest of the World (ROW) uses RON. RON is Research Octane Number and MON is Motor Octane Number.
APPLICATIONS

Does this fit your vehicle?

 
YEAR
MAKE
MODEL
SUBMODEL
ENGINE

PORSCHE TECH TALK

 

DRIVING MODES, FEATURES, AND SAFETY

Driving Modes - We’ve optimized boost, fueling, ignition, cams, and more to achieve greater power and torque in Normal, Sport, and Sport+ modes, while Wet-mode retains factory output levels for maximum safety, stability, and grip.

 

Features - In Sport Plus mode we’ve reduced turbo lag during reapplication of the throttle by building boost while off the throttle. We’ve raised the free-rev limit in neutral. We’ve optimized launch control, improving launches. The exhaust flap was recalibrated to reduce back-pressure and create turbo spool characteristics. Many other features, such as break boosting, left-foot braking, speed limiters, and more that are common modifications on other platforms are already present from the factory on this ECU.

 

Safety - With many customers tracking their Porsche, safety is paramount in our calibration strategy. Through the use of extreme datalogging equipment and additional sensors, thermocouples, and transducers, our engineers were able to fully optimize the ECU for advanced safety routines. This includes implementing several routines not enabled from the factory. The entire thermal management system is optimized to reduce engine bay temperature, and reduce intake air temperature, while also implementing advanced protection routines to prevent oil temperature from achieving unsafe levels. The exhaust crackles disable when temperature thresholds are crossed, and are only enabled in sport mode. Next, we help protect the engine from LSPI by preventing the engine from being lugged out in tall gears. We also protect the turbo from damaging compressor surge, and add in turboshaft overspeed protection. We’ve enabled new temperature protection routines to prevent the engine, exhaust, and other components from overheating, and have implemented temperature management strategies that are fully mindful of the platform’s limited fueling capabilities. We’ve calibrated torque delivery to be mindful of the transmission. We’ve optimized the injection strategy to not only deliver a fatter torque curve and better spool, but to reduce the chances of knock, and torque dips. This is also achieved alongside per cylinder ignition advance and fuel trimming. Serious track enthusiasts should consider running race fuel, and adding additional coolant and charge air cooling upgrades for maximum performance.

APR ECU UPGRADE STAGES

APR’s ECU Upgrades support various octanes both with or without any hardware modifications. Each stage is fully compatible with an upgraded intake, intercooler, exhaust, or other minor bolt on modifications. Unlike many platforms, no additional software tweaks are required to properly utilize a high flow race exhaust system as the factory system poses minimal restriction.

The APR Stage 1 ECU Upgrade is the first step towards making more power! This simple upgrade requires no engine hardware modifications, and produces 530-627 HP with 506-533 FT-LBS of torque, depending on octane. Gains as high as +67-147 WHP with +89-119 WFT-LBS of torque are available throughout the power band. To get more power, the vehicle can be outfitted with an upgraded intake, cooling, or exhaust system.

 

APR Stage 1 is available for 91 AKI, 93 AKI, 100 AKI, 104 AKI, and E60-E85 fuel grades in North America, and 95 RON, 98 RON, 104 RON, 108 RON, and E60-E85 in the Rest of the World.

/

The APR Plus ECU Upgrade is the first step towards making more power, and it includes our limited powertrain warranty. This simple upgrade requires no engine hardware modifications, and produces 530 HP with 506 FT-LBS of torque. Gains as high as +67 WHP and +89 WFT-LBS of torque are available throughout the power band, making the vehicle exceptionally quicker in all scenarios.

 

The APR Plus ECU Upgrade matches the performance of our Stage 1 ECU Upgrade (91 octane). To get even more power, you can add any of our other Stage 1 compatible products and still be covered under the APR Plus warranty! If you're not interested in the APR Plus limited powertrain warranty, and want even more power, check out our other Stages.

 

Please note, our E85 software is not a full flex fuel program. In this mode the engine is only designed to work on E85, as found directly at the pump, including both summer and winter blends from E60-E85. Using traditional pump fuels in this mode may result in engine damage. Do not manually blend with traditional pump fuel or race fuels or use race specific barrels of E85. To ensure proper E85 content levels, APR recommends using an E85 content sensor.

HORSEPOWER AND TORQUE DYNO CHARTS

Select a Dyno Select a Dyno Type
30t_992_911_gts_s0_vs_s1_e85_c.png
Porsche Rear Engine Dyno Testing Notes - This engine is extremely sensitive to intake air temperature (IAT) due to the rear engine and rear cooling design. Power figures on a stationary dyno will vary wildly with limited airflow compared to real world conditions. As IAT increases the calibration will intentionally reduce power to protect the engine.

APR CALIBRATION REPORT

STAGE HP TQ MAX GAIN MAX GAIN
Stock As Reported by Porsche  473  HP 420  FT-LBS    
Stock As Measured by APR 479  HP 427  FT-LBS    
APR PLUS        
91 AKI 530 HP 506 FT-LBS +67  HP +89  FT-LBS
STAGE 1        
91 AKI / 95 RON 530 HP 506 FT-LBS +67  HP +89  FT-LBS
93 AKI / 98 RON 540 HP 511 FT-LBS +72  HP +91  FT-LBS
100 AKI / 104 RON 576 HP 517 FT-LBS +100   HP +99  FT-LBS
104 AKI / 108 RON 593 HP 525 FT-LBS +117  HP +106  FT-LBS
E60-E85 627 HP 533 FT-LBS +147  HP +119  FT-LBS
Only use fuel equal to or higher than specified. Never use a lower octane fuel. Always follow our fuel guide, especially with race fuel and Ethanol, where available. Dynos are for reference only. Results will vary. Contributing factors include the vehicle condition, vehicle setup, dyno type, dyno setup, environmental factors, fuel quality, and more. When describing fuels, the North American Region (NAR) uses the Anti-Knock Index (AKI), (RON+MON)/2, or (R+M)/2. The Rest of the World (ROW) uses RON. RON is Research Octane Number and MON is Motor Octane Number.
 
 

PURCHASING, GUARANTEE, AND UPDATES

How to Purchase - APR Software Upgrades are only available through Authorized APR Dealers. The dealer will connect to your vehicle, and install the update.¹

 

Money-Back Guarantee - Try our Software Upgrades for up to 30 days, risk free! If you are not satisfied, return to an APR Dealer to have it removed and refunded.²

 

Free Updates - If we make an update, add a standard feature, or if the manufacturer issues an update, you are entitled to a free update.³

 

1. APR Software may not be available for all vehicles. Stages, programs, and features may not be available for all ECUs.
2. Excludes some Software Upgrades, such as those included with a hardware purchase. Labor charges are at the discretion of the installer.
3. Subject to availability. Labor charges are at the discretion of the installer. Applicable to the original purchaser. Second hand owners may inquire with an APR Dealer about a software license transfer fee.